Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
ES3000 V5 V100R001SPC100 (firmware version: 1010) can be upgraded in reset activation
mode only. Versions later than 1010 can be upgraded either in reset activation or immediate
activation mode.
5.5.2 Upgrading the SSD Firmware in Linux (PCIe SSD)
Operation Scenario
You can upgrade the controller firmware when a new version is released.
Preparations
Before upgrading the firmware, check that:
l
l
l
l
Procedure
Step 1 Log in to the OS as an administrator.
Step 2 Run the following command to view the name of the SSD to be upgraded:
hioadm info
The command output contains information similar to the following:
NVMe SSD Information
|---- nvme0 (0503023HDCN107C80013)
|---- nvme1 (0503023HDCN107C80014)
Step 3 Run the following command to view the controller firmware version of the SSD. (nvme0 is
used as an example. If there are multiple PCIe SSDs, perform steps 3 to 8 for each SSD.)
hioadm updatefw -d nvme0
The command output contains information similar to the following:
slot version activation
1
2
Issue 07 (2019-03-19)
Stop or exit the ES3000 V5 SSD applications or services, and unmount the file system
that uses the SSD device.
The firmware upgrade does not damage data on SSDs. However, you are advised to back
up important data on SSDs.
You have downloaded the firmware package to the server, and verified the package
integrity.
You have uploaded the controller firmware file to the server.
Controller
Namespace
|------------ nvme0n1 (512.0GB)
|------------ nvme1n1 (512.0GB)
1011
1011
current
NOTE
In the activation column, current indicates the firmware version in use, whereas next indicates the
firmware version that takes effect after next reset.
Copyright © Huawei Technologies Co., Ltd.
5 Maintenance and Upgrade
81
Advertisement
Table of Contents
