Huawei ES3000 V5 User Manual page 37

ES3000 V5 NVMe PCIe SSD
User Guide
Figure 3-8 WinSCP login
Step 2 Set the login parameters.
The parameters are described as follows:
l
l
l
l
Step 3 Click Login.
The WinSCP file transfer window is displayed.
Step 4 In the right pane, choose a directory of the remote host for storing files, for example, /root/
firmware.
Step 5 In the left pane, select a directory of the local PC for storing files, for example E:\Software,
and then select the file to be transferred.
Issue 07 (2019-03-19)
NOTE
To change the UI language, click Languages.
Host name: Enter the IP address of the remote host to be connected. For example,
191.100.34.32.
Port number: The default value is 22.
User name: Enter the user name. For example, admin.
Password: Enter the password.
NOTE
l If a key file was not selected during the first login, a warning Continue connecting and add host
key to cache is displayed. Click Yes. The WinSCP file transfer page is displayed.
l By default, the C:\Documents and Settings\Administrator\My Documents directory of the local
PC is opened in the left pane, and the /root directory of the remote host is opened in the right pane.
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Configuration
27