Uninstalling The Driver In Windows - Huawei ES3000 V5 User Manual

ES3000 V5 NVMe PCIe SSD
User Guide
Step 10 Run the modinfo nvme command to check the driver author information to determine
whether the driver is successfully installed.
The following command output indicates that the driver is successfully uninstalled.
modinfo: could not find module nvme
The following author in the command output also indicates that the driver is successfully
uninstalled.
author:
l
l
Step 11 Contact Huawei technical support for help. For details, see
----End

5.1.2 Uninstalling the Driver in Windows

Operation Scenario
If you want to stop using or replace the ES3000 V5, uninstall its driver first.
Uninstall the ES3000 V5 driver by following the procedure described in this section.
Do not uninstall the ES3000 V5 driver by using Device Manager. If you have uninstalled the
ES3000 V5 driver by using Device Manager, you still need to uninstall the driver by
following the procedure described in this section before installing the driver again. To install
the driver, see 3.6.2 Installing the ES3000 V5 Driver in Windows.
Uninstalling the Driver by Using Control Panel
Step 1 Log in to the OS as an administrator or a member of the administrator group.
Step 2 Stop the programs that are accessing the ES3000 V5.
Step 3 Choose Start > Control Panel.
The Control Panel window is displayed.
Step 4 Click Uninstall a program.
The Uninstall or change a program window is displayed, as shown in
Figure 5-1 Uninstall or change a program
Issue 07 (2019-03-19)
Matthew Wilcox <willy@linux.intel.com>
If yes, no further action is required.
If no, go to Step 11.
Copyright © Huawei Technologies Co., Ltd.
5 Maintenance and Upgrade
H Getting Help.
Figure 5-1.
72