Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
power on hours
unsafe shutdowns
media and data integrity errors: 0
number of error information log entries: 0
warning composite temperature time: 0 min
critical composite temperature time: 0 min
data status
The percentage used parameter displays the used lifespan percentage of the SSD.
If the value of percentage used exceeds 100%, the SSD lifespan has expired, and Huawei's
warranty service is unavailable. You need to back up data on the SSD as soon as possible and
replace the SSD.
----End
5.10 Common Faults
5.10.1 Hardware Connection Faults or Other Faults
Hardware connection faults are mostly identified by indicators. If the yellow indicator of a
device is on and the green indicator is off 30 seconds after a new drive is installed or during
proper operating, hardware faults occur. See
the faults.
Typical fault causes are as follows:
l
l
l
5.10.2 Drive Identification Faults or Other Faults
Drive identification faults indicate scenarios where the host OS disk manager (for example,
fdisk-l in Linux and the device manager in Windows) cannot properly identify ES3000 SSDs
when hardware connections are correct. If drive identification faults occur, collect all logs.
For details, see
Typical fault causes are as follows:
l
l
5.10.3 Drive Internal Faults or Other Faults
Drive internal faults indicate scenarios where drive internal alarms occur while the OS can
properly identify drives. If such faults occur, the drives do not function properly or cannot be
used. This section uses an example to describe how to identify such faults.
Issue 07 (2019-03-19)
The drive is not securely installed.
The drive is installed in a non-NVMe slot.
A drive hardware port fault occurs.
5.7.3 One-Click Log
The NVMe driver is not installed on the OS.
OS driver loading fails.
Copyright © Huawei Technologies Co., Ltd.
: 8852 h
: 250 times
: OK
5.11 Indicator Status Description
Collection.
5 Maintenance and Upgrade
to identify
90
Advertisement
Table of Contents
