Upgrading The Firmware Of An Ssd - Huawei ES3000 V5 User Manual

ES3000 V5 NVMe PCIe SSD
User Guide
Parameters
Parameter
devicename
Usage Guidelines
None
Example
# Query the firmware version of nvme0.
[root@localhost tool]# hioadm updatefw -d nvme0
slot
1
2

6.2.2 Upgrading the Firmware of an SSD

Function
This command is used to upgrade the firmware of an SSD.
If you run the following command with activeflag set to 1 (that is, firmware will be activated
immediately), services may be stopped. Before running this command, ensure that stopping
services has no adverse impact.
Format
hioadm updatefw -d devicename -f fwimagefile [-s slot] [-a activeflag]
Parameters
Parameter
devicename
fwimagefile
Issue 07 (2019-03-19)
version activation
1010 next
1011 current
NOTE
A SAS SSD has only one slot, and an NVMe SSD has multiple slots. The version number to the left of
next indicates the version that takes effect after the next reset. The version number to the left of current
indicates the current version in use. If the next line is not displayed, the version does not change after
the next reset.
Description
Name of an SSD.
Path of the target
firmware image file.
Copyright © Huawei Technologies Co., Ltd.
Description
Name of an SSD
Value
Example: nvme0
Example: /home/fw_image.img
6 Command Description
Value
Example: nvme0 or nvme1
112