Huawei ES3000 V5 User Manual page 144

ES3000 V5 NVMe PCIe SSD
User Guide
System Response
Parameter
selftest result
firmware abnormal
NAND flash
NOR flash
DDR UNC
ibuf UNC
capacitor
blank block
life
NOR flash patrol
firmware UNC
system area
bad block
controller
powerdown fiq
format fail
Issue 07 (2019-03-19)
Parameter Description
Overall test result. The value is passed or
empty.
If the result is success, all the following
sub-tests succeed and sub-test results are
not displayed.
If the result is failure, details of the
following sub-tests are displayed.
Firmware error status test result. Values are
passed and failed.
NAND flash test result. Values are passed
and failed.
NOR flash test result. Values are passed
and failed.
DDR UNC test result. Values are passed
and failed.
ibuf UNC test result. Values are passed and
failed.
Capacitor test result. Values are passed and
failed.
Blank block test result. Values are passed
and failed.
Life test result. Values are passed and
failed.
NOR patrol test result. Values are passed
and failed.
Firmware UNC test result. Values are
passed and failed.
System area test result. Values are passed
and failed.
Bad block test result. Values are passed and
failed.
Controller validity test result. Values are
passed and failed.
Power-off detection circuit test result.
Values are passed and failed.
Format failure test result. Values are passed
and failed.
Copyright © Huawei Technologies Co., Ltd.
6 Command Description
Value
Example: passed
Example: passed
Example: passed
Example: passed
Example: failed
Example: passed
Example: failed
Example: passed
Example: passed
Example: passed
Example: passed
Example: passed
Example: passed
Example: passed
Example: passed
Example: passed
134