Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
Step 4 Go to the directory where the controller firmware resides, for example, /home.
Step 5 Upgrade controller firmware. It is assumed that the upgrade file is ES3000V5_FW_2151.bin.
Select an upgrade mode based on the current SSD firmware version. For details, see
Upgrade
Reset activation mode:
Run the hioadm updatefw -d nvme0 -f ES3000V5_FW_2151.bin command and perform
steps 6 to 8.
Immediate activation mode:
Run the hioadm updatefw -d nvme0 -f ES3000V5_FW_2151.bin -a 1 command and
perform steps 6 and 8.
Step 6 Input y and press Enter to confirm the upgrade.
Step 7 Restart the OS after the upgrade.
Step 8 Run the following command to check whether the SSD controller firmware is upgraded:
hioadm updatefw -d nvme0
----End
5.5.3 Upgrading the SSD Firmware in Windows (PCIe SSD)
Operation Scenario
You are advised to upgrade the controller firmware immediately after a new version is
released.
Preparations
Before upgrading the firmware, check that:
l
l
l
l
l
Procedure
Step 1 Log in to the OS as an administrator.
Issue 07 (2019-03-19)
NOTE
Firmware upgrade supports either an absolute path or a relative path. If you skip this step, you need to
enter an absolute path in commands in next steps.
Paths.
You have uploaded the ES3000 V5 software package to a directory on the server, for
example, the D:\ directory.
Stop or exit the ES3000 V5 SSD applications or services, and uninstall the file system
that uses the SSD device (make the to-be-upgraded SSD to be offline in the disk
manager).
The firmware upgrade does not damage data on SSDs. However, you are advised to back
up important data on SSDs.
You have downloaded the latest firmware file to a specified folder on the server and
verified the file integrity.
You have upgraded the firmware driver to a compatible version.
Copyright © Huawei Technologies Co., Ltd.
5 Maintenance and Upgrade
5.5.1
82
Advertisement
Table of Contents
