Upgrading The Tool In Esxi; Upgrading The Controller Firmware; Upgrade Paths - Huawei ES3000 V5 User Manual

ES3000 V5 NVMe PCIe SSD
User Guide
Two upgrade methods are available:
l
l
Preparations
l
l
l
Procedure
Step 1 Uninstall the old tool package. For details, see
Windows.
Step 2 Install the new tool package. For details, see
----End

5.4.3 Upgrading the Tool in ESXi

Operation Scenario
Upgrade the tool to better manage the ES3000 V5 when a new tool version is available.
Procedure
Step 1 Run the hioadm -v command to check whether the current tool version is the latest.
Step 2 Install the latest version. For details, see
----End

5.5 Upgrading the Controller Firmware

This section describes how to upgrade the ES3000 V5 controller firmware in different OSs.

5.5.1 Upgrade Paths

Only ES3000 V5 SSDs are supported.
Issue 07 (2019-03-19)
Uninstall the old version and install the new version.
Upgrade the old version directly.
You have correctly installed the ES3000 V5 on the server.
You have downloaded the new tool package version and verified its integrity.
You have uploaded the tool package to the server by using Windows Secure Copy
(WinSCP) or other software.
NOTE
The tool upgrade procedure is the same as the tool installation procedure. The system will automatically
use the new version to replace the earlier version.
NOTE
The ES3500 and ES3600P series use the same drivers and firmware.
You can also use eSight to upgrade the ES3000 V5 controller firmware. For details, see the esight user
guide.
Copyright © Huawei Technologies Co., Ltd.
5.3.2 Uninstalling the Tool Package in
3.7.2 Installing the Tool Package
3.7.3 Installing the Tool
5 Maintenance and Upgrade
(Windows).
(ESXi).
80