Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
Step 7 Use four screws to secure the ES3000 V5 to the drive tray. See (3) in
Figure 3-4 Securing the ES3000 V5 to the drive tray
Step 8 Open the ejector lever and push the ES3000 V5 into the server until it does not move. See (1)
in
Figure
Step 9 Close the ejector lever to push the ES3000 V5 into place. See (2) in
Figure 3-5 Installing the ES3000 V5
----End
3.2.2 Installing the ES3000 V5 NVMe PCIe SSD Card on a Riser
Card
Step 1 Wear ESD gloves.
Step 2 Turn off the power to the server and remove the chassis cover.
Step 3 Take the new ES3000 V5 out of the ESD bag.
Issue 07 (2019-03-19)
3-5.
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Configuration
Figure
3-4.
Figure
3-5.
23
Advertisement
Table of Contents
