Table of Contents
Advertisement
ES3000 V5 NVMe PCIe SSD
User Guide
Step 6 Press Esc to exit the edit mode. Enter :wq and press Enter. Save and exit the snmpd.conf
file.
Step 7 If SNMP v3 is enabled, stop SNMP services before running the following command:
net-snmp-config --create-snmpV3-user -ro -a (Huawei123#$) -A MD5 (V3user)
Huawei123#$ is the password. V3user is an SNMP user name. You can change the user name
and password.
Step 8 Run the following command to start SNMP services:
service snmpd start
Step 9 If SNMP services are already running, run the following command to restart SNMP services:
service snmpd restart
----End
Uninstalling the Software
Step 1 Log in to the OS as the root user.
Step 2 Uninstall the Linux tool package. For details, see
Linux.
Step 3 Open the snmpd.conf file described in the installation procedure and delete the following
content (assuming that the Net-SNMP version is 5.7):
dlmod es3000V3 /usr/lib/hioadmsnmp_5.7.so
----End
C.4 Querying SNMP Information
This section describes the software for querying ES3000 V5 SNMP information and where to
obtain the software.
Using the Net-SNMP Command Set
You need to install net-snmp-utils before using the Net-SNMP command set to query ES3000
V5 SNMP information. You can use the Linux Net-SNMP tool package.
For details about how to use the Net-SNMP command set, see http://www.net-snmp.org.
Using a MIB Browser
You can use a management information base (MIB) browser to query SNMP information.
Multiple MIB browsers are available. The MG-SOFT MIB browser is recommended. The
browser is a Windows graphical user interface (GUI) tool with the trap receiving function.
For details about how to download and use the MG-SOFT MIB browser, see
software.informer.com.
Issue 07 (2019-03-19)
Copyright © Huawei Technologies Co., Ltd.
5.3.1 Uninstalling the Tool Package in
C SNMP Function
http://
213
Advertisement
Table of Contents
