Obtaining The Enablement Status Of Functions - Huawei ES3000 V5 User Manual

ES3000 V5 NVMe PCIe SSD
User Guide
l
The subcommand is used to set the SSD model number. The host uses PRP1 and PRP2 to
send model information in the format described in Table6.
Table A-22 Model
Bytes
15:00
l
The subcommand is used to set the SSD SN. The host uses PRP1 and PRP2 to send SN
information in the format described in Table7.
Table A-23 SN
Bytes
19:00
l
This command is used to obtain the FLASH ID. This command uses PRP1, PRP2, and
Dword10. The data length is specified by Dword10 (fixed at 2).
Table A-24 FLASH ID
BIT
63:00
A.6.1.1.3 Obtaining the Enablement Status of Functions
This command is used to obtain the enablement status of a customized function through the
controller.
This command uses the PRP1, PRP2, Dword10, and Dword12 fields. Enter reserved value 0
for other fields that are not involved.
Sub_OpCode describes parameter types.
Table A-25 Sub_OpCode
Sub_OpCode
430006h
F00009h
Issue 07 (2019-03-19)
Model
SN
FLASH ID
Description
Flash inspection enablement
Capacitor inspection enablement
Copyright © Huawei Technologies Co., Ltd.
A Supported NVMe Commands
Description
Model
Description
SN
Description
FLASH ID
173