Set Up The Lcd Display - Emerson Rosemount 5408 Reference Manual

Operation
June 2019
Table 6-1: LCD Display Variables
Parameter
Level
Distance
Level Rate
Signal Strength
Volume
Electronics Temperature
Signal Quality
Scaled Variable
Auxiliary Percent of Range
User Defined Variable
(1) Only for transmitters ordered with Smart Diagnostics Suite (option code D01).
(2) Default, user selectable display text (up to five characters).
Related information
User defined variable setup
6.2

Set up the LCD display

6.2.1 Set up the LCD display using Rosemount Radar Master
Plus
It is possible to specify the variables to be presented on the optional LCD display.
Procedure
1. Under Configure, select Device Setup, and then select the Display tab.
82
Presentation on display
LEVEL
DIST
LR
AMP
VOLUM
ITEMP
(1)
SIG QUALITY
(1) (2)
SCALE
AUX %RANGE
(1) (2)
USER
Reference Manual
00809-0300-4408
Description
The current level measurement
value.
Distance from the upper
reference point to the product
surface.
The current velocity at which
the level is moving. A positive
value indicates the surface is
moving up.
The signal amplitude of the
surface echo.
Volume of the product at the
current level.
The current temperature at the
electronics.
The quality of product surface
echo signal compared to
surface threshold and noise.
A variable calculated from a
scaling table (as defined by
pairs of input/scaled values).
A variable value expressed in
percent within a range defined
by the lower and upper range
values (0% and 100%).
A variable associated with a
selected register in the device.
Reference Manual