Mounting Preparations - Emerson Rosemount 5408 Reference Manual

Mechanical installation
June 2019
3.4

Mounting preparations

3.4.1 Assemble the segmented cone antenna
This section applies to the segmented cone antenna (option code S2). Use only one
segment; the total antenna length should not exceed 47.2 in. (1200 mm).
To determine the antenna length, follow the guidelines in section
Procedure
1. Insert the segment into the cone antenna until it bottoms.
2. Mark where to cut the segment.
3. Remove and cut the segment at the marking.
4. Remove any burrs.
5. Insert the segment into the cone antenna until it bottoms.
6. Secure the segment to the antenna.
30
Note
Be careful of sharp edges. Wear protective gloves!
Reference Manual
00809-0300-4408
Nozzle requirements.
Reference Manual