Emerson Rosemount 5408 Reference Manual page 170

Specifications and reference data
June 2019
A.7.1 Standard flanges
Figure A-16: Cone Antenna Flange Connection
A. Forged one-piece
B. Welded construction
C. Protective plate design
D. Weld
E. Backing flange
F. Protective plate
Table A-16: Standard Flanges for Cone Antenna
Standard
ASME B16.5
EN 1092-1
JIS B2220
(1) Face gasket surface is serrated per mating standard.
Table A-17: Cone Antennas with Protective Plate
Standard
ASME B16.5
EN 1092-1
JIS B2220
Figure A-17: Parabolic Antenna Flange Connection
170
(1)
Face type
Raised face
Ring type joint
Type B1 raised face
Type A flat face
Raised face
Face type including protective plate
Raised face
Raised face
Raised face
Reference Manual
00809-0300-4408
Face surface finish, R
a
125-250 µin
< 63 µin
3.2-12.5 µm
3.2-12.5 µm
3.2-6.3 µm
Plate surface finish, R
a
3.2-6.3 µm
3.2-6.3 µm
3.2-6.3 µm
Reference Manual