Mechanical installation
June 2019
Postrequisites
Align the transmitter head (see
3.5.5
Threaded version, antenna diameter smaller than thread
diameter
Threaded tank connection
Prerequisites
If applicable, assemble the segmented cone antenna (see
antenna).
Procedure
1. Apply anti-seize paste or PTFE tape on threads according to your site procedures.
2. Mount the transmitter on the tank.
38
Table 3-8: Incoming Air Supply Specification
Maximum pressure
190 psi (13 bar)
Gasket may be used as a sealant for adapters with 1½- or 2-in. BSPP (G) threads.
Recommended pressure
100 to 115 psi (7 to 8 bar)
Align transmitter
head).
Reference Manual
00809-0300-4408
Assemble the segmented cone
Reference Manual