Emerson Rosemount 5408 Reference Manual page 209

Reference Manual
00809-0300-4408
Related information
Output variables
Percent of range auxiliary
Set this parameter to output a transmitter variable in percent of range.
Table C-1: Percent of range auxiliary
Parameter
Percent of range auxiliary
100% auxiliary
0% auxiliary
Damping value
This parameter defines how fast the transmitter reacts to a change of the level value (step
response). The default value is 2 seconds.
A high value makes the level reading steady, while a low value allows the transmitter to
respond to rapid level changes (but the presented level value may be less steady).
Block mode summary
Device mode
The resource, measurement transducer, and all function blocks in the device have modes
of operation. The device mode can be either In Service or Not in Service.
Table C-2: Device Mode Images in Rosemount Radar Master Plus
Status
Table C-3: Device Mode Images in AMS Device Manager
Status
Rosemount 5408 Level Transmitter
Description
The variable selected for percent of range
auxiliary.
Value corresponding to 100 percent range of
variable selected for percent of range auxiliary.
Value corresponding to 0 percent range of
variable selected for percent of range auxiliary.
Description
All device blocks are in Auto
mode.
At least one block in the device
is in Out of Service mode.
Description
All device blocks are in Auto
mode.
At least one block in the device
is in Out of Service mode.
Configuration parameters
June 2019
Action
Click the device mode image to
set all blocks (except resource
block) into Out of Service mode
or to set all blocks into Auto
mode.
Action
Click Change to set all blocks
(except resource block) into Out
of Service mode or to set all
blocks into Auto mode.
209