Write Protection - Emerson Rosemount 5408 Reference Manual

Configuration parameters
June 2019
Block mode summary
The block mode summary displays the active mode for all resource and transducer blocks,
and allows the user to change modes of those blocks individually, or collectively.
C.2.2 Units
The units for length, volume, temperature, and level rates are selectable. All configuration
parameters and transmitter variables will be expressed in these units.
Related information
Output units
C.2.3 Display
Select variables to show on the optional LCD display (option code M5). If more than one
variable is selected, then the LCD display toggles between the output variables.
Related information
LCD display screen messages
Set up the LCD display
C.2.4 Security

Write protection

The Rosemount 5408 with F
software write protection. Locking the transmitter will prevent configuration changes until
it is unlocked again.
Software write protection
The transmitter can be software write protected to prevent unauthorized configuration
changes.
Hardware write protection
Contact your local Emerson representative for instructions on how to enable the hardware
write protection.
C.2.5 Device information
Device tag
Identifier of up to 32 characters for the transmitter used by host system. The tag is
typically a reference number, location, or duty description.
C.2.6 Classic view
Classic view provides an alternate way to view parameters and perform manual setup. In
the classic view, the individual screens used for manual setup are replaced by a single
210
™
Fieldbus protocol supports both hardware and
OUNDATION
Reference Manual
00809-0300-4408
Reference Manual