Trouble During Printing - Fuji Xerox DocuWide 6035 User Manual

9 Problem Solving

Trouble during Printing

This section describes how to solve printing problems.
Unable to print.
Unable to print
9
using the man-
ual feed table.
184
Symptoms
Can the printer be con-
firmed with CentreWare
Internet Services?
Is the power switch of the
machine turned on?
Is the print mode [Offline]?
Is the network cable of the
machine disconnected?
Has any error occurred on
the machine?
Are the IP address and Sub-
net Mask set correctly?
Has an interrupt operation
been performed?
Is the machine in the scan
mode?
Is the specified media size
loaded correctly?
Check
Check the printer by displaying [Status] on
the CentreWare Internet Services.
See • "Confirming Printing Status and Condi-
Turn the power switch on.
See • "Power On/Off" (P.33)
Select [Online] in the [Print Mode] screen.
See • "Machine Information" (P.259)
Connect the network cable of the machine.
Check the error message, and follow the
instructions to solve the problem.
See • "Error Message" (P.185)
Set the correct IP address and Subnet
Mask.
See • "Network Settings" (P.222)
Cancel the interrupt operation by pressing
the <Interrupt> button on the control panel.
Printing is not available during the scan
mode (while storing data in the mailbox).
Outputting starts when all of the docu-
ments have been scanned.
Load the correct size media in accordance
with the message displayed and print
again.
See • "Using the Manual Feed Tray (Bypass)"
Remedy
tions with CentreWare Internet Services"
(P.140)
(P.43)