Machine Clock/Timer - Fuji Xerox DocuWide 6035 User Manual

11 System Settings

Machine Clock/Timer

This screen allows you to set the date and time,
or the timer interval until power saving or reset
features take effect.
The following items can be set:
Machine Clock
Time Zone
Auto Power Saver
Auto Clear
11
Backlight Off
214
Items
Set the date and time on the machine.
Note
Set the time zone in the range of GMT (Greenwich Mean Time)
-12:00 to +12:00 in one hour increments, except for [-3:30],
[+3:30], [+4:30], [+5:30], [+9:30].
The factory default value is [+9:00].
The Power Saver feature has two modes: [Low Power mode]
and [Sleep mode].
Factory default value:
Low Power Mode: [15min], Sleep Mode: [60min]
See
From Last Selection to Set the time from the last operation at which to enter the low
Low Power Mode power mode from 5 to 240 minutes, in 1 minute increments.
From Last Selection to Set the time from the last operation at which to enter the sleep
Sleep Mode mode from 5 to 240 minutes, in 1 minute increments.
Note
Set the duration after which the machine automatically returns
to the [Menu] screen if no operation is executed.
Factory default value: [1min]
Off Disables the Auto Clear feature.
On Select the Auto Clear interval from 0.5 min, 1 min, 1.5 min, 2
min, 2.5 min, and 3 min.
Set whether to switch off the backlight after a certain period of
preset time has elapsed with no operations being executed on
the Control Panel.
Factory default value: [Off]
Off The backlight is not turned off automatically.
Same as Auto Clear The backlight is turned off automatically in conjunction with the
Auto Clear setting.
Note
[System Settings]>[System Settings]>[Common Settings]
Machine Clock/
Timer Settings
Items
1.Machine Clock
2.Time Zone
3.Auto Power Saver
4.Auto Clear
5.Backlight Off
Notes
• The new settings will take effect after the machine
restarts.
• "Changing the Power Saver Mode Change Interval"
(P.35)
• The [From Last Selection to Sleep Mode] time cannot be
shorter than the [From Last Selection to Low Power
Mode] time.
• To disable the Backlight Off feature, use the following
procedure:
- Press any button on the Control Panel
- Touch the Touch Screen (setting screen)
Close
Current Settings
---
GMT +9:00
Low Power:15 Sleep: 60
1 min.
Off