Registering Distribution Patterns - Fuji Xerox DocuWide 6035 User Manual

2 Copy
9
Press the <Start> button.
The machine starts outputting copies.

Registering Distribution Patterns

When selecting [Program] for copying, register distribution patterns beforehand.
1
Select the <Menu> button.
2
Select [Setup Menu].
2
3
Select [Program Distribution].
4
Select an unregistered program number and
press [Create/Edit].
Note
5
Select a virtual distribution destination, and then
enter the number of copies via the numeric key-
pad.
Note
54
• [Press [ ] to display the previous screen and
press [ ] to display the next screen.
• To specify the program number directly, enter
a 3-digit number via the numeric keypad under
[Go to].
• Maximum number of documents: 800 sheets
• Maximum number of programs: 300 patterns
• Maximum number of virtual distribution desti-
nations: 40 bins
• Maximum copy quantity for a program: 99 cop-
ies
Transmitting
Copy Scan Menu
Job in memory
Job Status
Interrupt
Machine Status
Log In/Out
<Start> button
Please select the required service.
Menu
Language
Copy
Scan Setup Menu
Stored
Programming
Setup Menu
Stored
Copy Program Scan Program
Stored Multi-
Mailbox
Job Program
Program
Distribution
Program
Distribution
001. (Not Reg.) 006. (Not Reg.)
007. (Not Reg.)
002. (Not Reg.)
003. (Not Reg.)
008. (Not Reg.)
004. (Not Reg.)
009. (Not Reg.)
010. (Not Reg.)
005. (Not Reg.)
Page 1 of 30
Cancel
Program 001
Copies Copies Copies Copies
Copies Copies Copies
Copies
Page 1/4
Copy from
Memory
Power Saver
Clear All
Stop
Start
Close
Close
Go to
(001-300)
Create
/Edit
Delete
Close
Copies
Copies