Fuji Xerox DocuWide 6035 User Manual page 222

11 System Settings
Original Size System
This screen allows you to set the document size series for detecting the document
size. Set the frequently used document size series by width.
The factory default value is: [ISO Series].
Select from the following three document size
series.
JIS Series
ISO Series
ARCH/ANSI
Series
11
Metric/Inch System
Allows you to select whether to display dimensions on the screen in millimeters or
inches.
The factory default value is [Millimeters].
Overwrite Hard Disk
Allows you to select whether to overwrite the hard disk.
When copy/scan/print data is deleted from the hard disk, this feature overwrites the
resulting vacant area with disk wipe data. By overwriting the disk, the content of the
hard disk can be protected from illegal acquisition or restoration. Temporarily stored
data can also be processed with this feature.
The following items can be set:
220
Items Original Size
Series
ISO/JIS A
JIS B
SP A A0
A1
A2
ISO/JIS A
ISO B
SP A A0
A1
A2
ARCH-1
ARCH-2
ANSI
Original Size System
JIS
Series
ISO
Series
Arch/ANSI
Series
Size in the Width Direction
A0, A1, A2, A3, A4
JIS B1, JIS B2, JIS B3, JIS B4, JIS B5
880mm, 860mm
Select 625mm or 620mm.
Select 440mm or 435mm.
A0, A1, A2, A3, A4
ISO B1, ISO B2, ISO B3, ISO B4, ISO B5
880mm, 860mm
Select 625mm or 620mm.
Select 440mm or 435mm.
36", 24", 18", 12", 9"
30", 21", 15", 10.5"
34", 22", 17", 11", 8.5"
Cancel Save
ISO/JIS A A0, A1, A2, A3, A4
JIS B B1, B2, B3, B4, B5
Special A0 880mm, 860mm
Special A1 625mm 620mm
Special A2 440mm 435mm