Battery Pack Replacement; Battery Pack Disposal - Snap-On ZEUS User Manual

Maintenance

15.8.2 Battery Pack Replacement

If the battery pack no longer holds a charge, contact your sales representative to
order a new one.
IMPORTANT
Replace the battery pack with a Snap-on replacement battery pack only.
z
To replace the battery pack:
1. Loosen the two battery pack screws.
2. Carefully tilt the battery pack up from the bottom, and then remove it.
1. Battery Pack
2. Battery Pack Screws (2)
Figure 15-1 Battery pack location
3. In the opposite manner of removal; insert the new battery pack into position,
then tilt it down into place making sure it is fully seated.
NOTE
Do not overtighten the battery pack screws.
4. Tighten the two battery pack screws.

15.8.3 Battery Pack Disposal

Always dispose of a lithium-ion battery pack according to local regulations, which
vary for different countries and regions. The battery pack, while non-hazardous
waste, does contain recyclable materials. If shipping is required, ship the battery
pack to a recycling facility in accordance with local, national, and international
regulations. For additional information contact:
United Kingdom—Electrical Waste Recycling Company at http://
•
www.electricalwaste.com
Products bearing the WEEE logo
regulations.
Figure 15-2 sample WEEE logo
NOTE
Always dispose of materials according to local regulations.
Contact your sales representative for details.
184
(Figure 15-2) are subject to European Union
Battery Pack