Landoll SSB-8 Operator's Manual page 24

ASSEMBLY INSTRUCTIONS
3. Be sure parking pin is locking rear roller down. See
Figure 3-6.
4. Remove 5/8" shipping bolt from right side of frame
which locks rear roller down. Bolt is located in a
position similar to the parking pin.
5. Install the LED Warning Lamps and Harnesses. See
Figures 2-7, 2-8, 2-9 and 2-10.
Parking Pin
2-2
Figure 2-2: Shipping Bolt and Parking Pin

CAUTION
Do not disengage pin unless seeder is fully
attached to a tractor. Seeder may be rear-heavy
and tip backward on frame
Shipping
Bolt
1P480rev0718