Table of Contents
Advertisement
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly,
maintenance and safe operation will allow this implement
to provide you with satisfactory use for seasons to come.
Read this entire manual before attempting to
assemble, adjust or operate this implement.
Failure to comply with this warning can result in
personal injury or death, damage
implement or its components and inferior
operation.
Description of Unit
The Brillion SS Series Seeder combines the features of
our popular and reliable Sure Stand Seeder with
additional box capacity.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
• The information in this manual is current at the time of
printing. Some parts may change to assure peak
performance.
• Location reference: Right and Left designations in this
manual are determined by facing the direction the
implement will travel during field operation, unless
otherwise stated.
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. Your implement's parts should only be
replaced with Brillion parts. Have the Serial Number and
complete Model Number available when ordering parts
from your Brillion dealer. If items covered in this manual
are not understood, contact your local Brillion Dealer.
DANGER
to the
Safety Information
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered,
within 10 days of retail purchase, using the Landoll
Corporation Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
www.landoll.com
instructions regarding product registration.
Enter your product information below for quick reference.
Refer to the ID plate as shown in Figure 1-1. The ID Plate
is located on the right front of the machine.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
Figure 1-1: ID Plate
Federal law requires that you explain the safety and
operating instructions furnished with this implement to all
operators before they are allowed to operate the
implement. These instructions must be repeated to the
operators at the beginning of each season. Be sure to
observe and follow the instructions for the safety of
anyone operating or near the implement.
Chapter 1
for step by step
1-1
Hide quick links:
Advertisement
Table of Contents
