Landoll SSB-8 Operator's Manual page 26

ASSEMBLY INSTRUCTIONS
4. If equipping unit with scrapers or tire track removers,
install at this time. See Figures 2-15 and 2-16.
6. Install hub and spindles into the wheel arms and
secure in outside hole farthest from the hub. Secure
with 1/2-13 x 3" Screws and Locknuts. Apply
anti-seize to spindles. See Figure 2-5.
7. Install wheels and tires to hubs using (10) 1/2-20 x 1
Wheel Bolts. Torque wheel bolts to 80-85 ft/lbs.
2-4
5. After the drawbar is attached route the hoses along
Figure 2-4: Drawbar Hydraulic Hoses
Charge the Hydraulic System.
For a more detailed view, refer to the Hydraulic
Schematic Diagram. See Figure 4-7.
drawbar toward the tractor. Use the hose clamps
provided to anchor the hoses to the drawbar. See
Figure 2-4.
1P480rev0718