Parking Pin (Pick-Up Seeders Only) - Landoll SSB-8 Operator's Manual

Parking Pin (Pick-up Seeders Only)


To prevent the implement from tipping backward
on the frame, disengage parking pin only when
the seeder is fully attached to the tractor. Be sure
to observe the following sequences.
Figure 3-5: Parking Pin
When Hooking Up the Seeders:
1. Attach seeder to the tractor.
2. Remove the Klik pin, pull the parking pin into the
outer position, replace the Klik pin. See Figures 3-5
and 3-6.
When Unhooking the Seeder:
1. Remove the Klik pin, push in the parking pin, replace
the Klik pin. See Figures 3-5 and 3-7.
2. Disconnect the tractor from seeder.
WARNING
Klik Pin
Parking
Pin
Figure 3-6: Hooking Pick-Up Seeder
Figure 3-7: Unhooking Pick-Up Seeder
OPERATION
3-5