The "Settings - Communication" Menu Item - Siemens SIMATIC RF185C Operating Instructions Manual

Configuring with the WBM
7.3 The menu items of the WBM
Parameter
Max. number of tran-
sponders
Transponder type
You can find a detailed description of these parameters in the following paragraphs.
1)
7.3.4

The "Settings - Communication" menu item

The "Settings - Communication" menu item is divided into three tabs.
● Network interfaces
● PLC
● OPC UA
In the "Network interfaces" tab, you can enable/disable the network ports, SNMP and NTP
protocols. You can disable STEP 7 access in the "PLC" tab. In the "OPC UA" tab, you can
enable and edit the OPC UA server function of the communications module.
The "Network interfaces" tab
The "Network interfaces" tab is divided into the following areas:
● Network ports
● SNMP
● NTP
66
Parameter value
1 ... 40
1)
Default value Description
1 Number of transponders expected in the anten-
na field.
The selection depends on the connected de-
vice.
Selection of the transponder types used. The
1)
selection depends on the connected device.
Operating Instructions, 10/2018, C79000-G8976-C512-01
SIMATIC RF185C, RF186C, RF188C