Siemens SIMATIC RF185C Operating Instructions Manual page 102

Programming via the OPC UA interface
9.2 OPC UA variables
Table 9- 18
Path
Data type
Access
Description
Possible values
Table 9- 19
Path
Data type
Access
Description
Possible values
Table 9- 20
Path
Data type
Access
Description
Possible values
102
PC
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Rfid/Identifier
UInt16
R
Diagnostics on the last transponder access
Outputs the protocol control word of the transponder that was
accessed last. This variable is only supported by UHF readers.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
Example:
3000
Polarization
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Rfid/Identifier
String
R
Diagnostics on the last transponder access
Outputs the polarization with which the last command was exe-
cuted on the transponder. This variable is only supported by UHF
readers.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
•
•
•
•
Strength
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Rfid/Identifier
Int32
R
Diagnostics on the last transponder access
Outputs the RSSI value with which the last command was exe-
cuted on the transponder. This variable is only supported by UHF
readers.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
0 ... 255
Default
Circular
Linear_vertical
Linear_horizontal
Operating Instructions, 10/2018, C79000-G8976-C512-01
SIMATIC RF185C, RF186C, RF188C