Siemens SIMATIC RF185C Operating Instructions Manual page 61

Device clock
With the "Synchronize with PC" button, you can synchronize the device clock with the time in
your operating system.
Note
The device time always corresponds to UTC time
Note that the time of the device clock corresponds to UTC time and cannot be adjusted to
time zones. Clicking the button transfers the local time stored in your operating system to the
communications module. Because the time synchronized with the PC is lost when the power
supply is terminated, we recommend synchronizing the time with an NTP server.
Configuration display
The current configuration is shown to the right of the four areas. The schematic diagram
contains information on the connected communications module type and readers.
With the "Flash" check box, you can have the LEDs of the connected communications
module flash. This enables you to quickly and easily identify the connected communications
module.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
Configuring with the WBM
7.3 The menu items of the WBM
61