Siemens SIMATIC RF185C Operating Instructions Manual page 101

Table 9- 16
Path
Data type
Access
Description
Possible values
Table 9- 17
Path
Data type
Access
Description
Possible values
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
Antenna
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Rfid/Antenna
Int32
R
Diagnostics on the last transponder access
Indicates the antenna via which the transponder was accessed
with the last command.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
Two-digit number
The first digit stands for the read point index, the second digit for
the antenna index within the read point.
Example:
•
•
CurrentPowerLevel
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Diag
nosis/LastAccess/Rfid/CurrentPowerLevel
Int32
R
Diagnostics on the last transponder access
Outputs the power with which the last command was executed
on the transponder. This variable is only supported by UHF
readers.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
Decimal number for the power in [dB]
Increment: 0.25 dB
•
•
Programming via the OPC UA interface
Read point 1, antenna 1: 11
Read point 2, antenna 1: 21
0
5.00 ... 33.00
9.2 OPC UA variables
101