9.2.2
ExecuteScan
Table 9- 4
Path
Data type
Access
Description
Possible values
9.2.3
CommonSettings
You can make basic settings on the RF18xC communications module using these variables.
Table 9- 5
Path
Data type
Access
Description
Possible values
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
ExecuteScan
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Exec
uteScan
Boolean
R/W
Indicates whether the read point is currently scanning for tran-
sponders or allows the scan process to be activated/deactivated.
Query of the current status:
•
•
Set:
•
•
CodeTypes
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Com
monSettings/CodeTypes
UInt32
R/W
Definition of the data type for all AutoID identifiers in "AutoID
Standard".
The setting has an effect specifically on the data type of the
"LastScanData", variable, the "Identifier" diagnostics variable and
the "ScanData" union used for the "Identifier" in methods or
events.
The types "String", "ByteString" and "ScanDataEpc" are support-
ed. The type definition of "CodeTypes" is "MultiStateDiscrete-
Type". This means that the variable has an "Enum" that indicates
the supported data types as "Property".
•
•
•
Programming via the OPC UA interface
TRUE: Read point scans for transponders.
FALSE: Read point does not scan for transponders.
TRUE: The scan process of the read point for transponders is
activated.
FALSE: The scan process of the read point for transponders
is deactivated.
0: ByteString
1: String
2: ScanDataEpc
9.2 OPC UA variables
95