Siemens SIMATIC RF185C Operating Instructions Manual page 124

Service and maintenance
10.2 Error messages
"ER" Block (hex)
LED
4x 0xE1FE0500
4x 0xE1FE0600
4x 0xE1FE0700
4x 0xE1FE0800
4x 0xE1FE0900
4x 0xE1FE0A00
4x 0xE1FE8100
4x 0xE1FE8200
4x 0xE1FE8300
4x 0xE1FE8400
4x 0xE1FE8500
124
Error description
The transponder memory is full.
Possible causes:
The address range of the transponder has been exceeded.
•
Error in transponder memory
The transponder has never been written to or has lost the contents of its memory due to battery
failure.
Possible causes / action to be taken:
Replace the transponder (if the battery bit is set).
•
Re-initialize the transponder.
•
Password error
RF620R/RF630R: Incorrect password
The transponder in the antenna field does not have the expected UID or has no UID.
The command is not supported by the transponder.
The transponder is read/write-protected.
The transponder is not responding.
The transponder password is incorrect. Access is denied.
The verification of the written transponder data has failed.
General transponder error
The transponder has too little power to execute the command.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01