Siemens SIMATIC RF185C Operating Instructions Manual page 110

Programming via the OPC UA interface
9.3 OPC UA events
Table 9- 35
Data type
Description
Possible values
Table 9- 36
Data type
Description
Possible values
Table 9- 37
Data type
Description
Possible values
Table 9- 38
Data type
Description
Possible values
110
Antenna
Int32
The antenna via which the transponder was accessed with the
last command.
Two-digit number
The first digit stands for the read point index, the second digit for
the antenna index within the read point.
Example:
•
•
CurrentPowerLevel
Int32
Power with which the last command was executed on the tran-
sponder. This variable is only supported by UHF readers.
Decimal number for the power in [dB]
Increment: 0.25 dB
•
•
PC
UInt16
Protocol Control Word of the transponder that was accessed last.
This variable is only supported by UHF readers.
Example:
3000
Polarization
String
Polarization with which the last command was executed on the
transponder. This variable is only supported by UHF readers.
•
•
•
•
Read point 1, antenna 1: 11
Read point 2, antenna 1: 21
0
5.00 ... 33.00
Default
Circular
Linear_vertical
Linear_horizontal
Operating Instructions, 10/2018, C79000-G8976-C512-01
SIMATIC RF185C, RF186C, RF188C