Siemens SIMATIC RF185C Operating Instructions Manual page 16

Description
3.3 Design
Note
Synchronize device time
Note that the time of the device clock corresponds to UTC time and cannot be adjusted to
time zones. Clicking the button transfers the local time stored in your operating system to the
communications module. Because the time synchronized with the PC is lost when the power
supply is terminated, we recommend synchronizing the time with an NTP server.
Later in the document, these symbols will help your orientation and will show you whether
the section is of interest to you or not. Only the sections with user-specific content, in other
words content that is tool/interface-specific, contain these symbols. Sections without these
symbols are general and relevant for both areas of application.
16
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01