Siemens SIMATIC RF185C Operating Instructions Manual page 48

Hide thumbs Also See for SIMATIC RF185C:
Table of Contents

Advertisement

Configuring
6.2 Configuration via PROFINET IO
6. Assign parameters to the communications module (e.g. module parameters).
7. Save the configuration, or download it to the PROFINET IO controller.
You can find additional information in the section "Assign the IP address / device name
(Page 43)".
Parameter assignment with the device configuration
You can set the basic parameters of the communications module, as well as the parameters
of the readers connected to the communications module, using the properties window of the
communications module. You can set all module-specific parameters using the following
parameter groups.
"Web Based Management" parameter group
You can start Web Based Management in this parameter group.
Table 6- 1
Parameters of the "Web Based Management" parameter group
Parameter
Web Based Manage-
ment
"Configuration management" parameter group
You can load or save configuration data in this parameter group.
Table 6- 2
Parameters of the "Configuration management" parameter group
Parameter
User name
Password
Load configuration to
device
Save configuration in
project
48
Description
Start Web Based Management of the communications module.
Web Based Management (WBM) offers extensive functions for configuring the communications
module.
Note: WBM can only be started when either the PROFINET connection between CPU and com-
munications module has been established or the IP address stored in the project has been as-
signed to the communications module. This means that the device name must have been
assigned and the TIA configuration must be loaded into the SIMATIC controller.
Description
User name of a user created on the communications module
Note that the user must have the required rights.
Enter the password for the user
Load configuration data from the STEP 7 project into the communications module.
Save configuration data of the communications module in the current STEP 7 project.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic rf186cSimatic rf188c

Table of Contents