Figure 7-6
The "Settings -- Communication" menu item, "Network interfaces" tab
Network ports
In the "Network ports" area, you can enable/disable the network ports of the communications
module. Click on the check box of the required network port to enable or disable it.
Note
Disabling the network ports
Make sure that you do not disable the port via which you are currently communicating with
the device.
Note
Requirement for port statistics
You can read out port statistics using PROFINET diagnostics and via SNMP.
Enable the "LLDP" check box to activate the communications log. "LLDP" is a protocol for
monitoring the neighborhood.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
Configuring with the WBM
7.3 The menu items of the WBM
67