Siemens SIMATIC RF185C Operating Instructions Manual page 46

Configuring
6.1 Assign the IP address / device name
3. Click on the "Search"
A dialog box opens with the information that a device was found in the network.
4. Click on the "+" character beside the folder symbol in the structure tree and click the entry
"Ind. Ethernet interface".
Figure 6-2
5. To assign a new IP address to the communications module, select the "Assign IP
parameters" option.
6. Enter a new, unique IP address for the communications module in the "IP address" input
box.
7. Enter the subnet mask of your network in the "Subnet mask" input box.
8. Click on "Assign Name" to assign a unique device name to the communications module.
9. Click the "Load" icon
10.Confirm the next dialog box with "Yes".
Note
Waiting time
Wait until the IP address / the device name has been updated. To display the change,
you need to activate the search function using the "Search" icon
Result: The communications module is assigned the new IP address and a new device
name.
46
icon in the toolbar.
Assign IP address and device name
to transfer the settings to the communications module.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
.