Siemens SIMATIC RF185C Operating Instructions Manual page 107

Table 9- 27
Data type
Description
Possible values
Table 9- 28
Data type
Description
Possible values
Table 9- 29
Data type
Description
Possible values
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
DeviceName
String
DisplayName of the read point from which the event comes.
This Property is inherited from "AutoIdDiagnosisEvent". The
BrowseName of the read point is supplied via the standard prop-
erty "SourceName" of "BaseEvent".
Example:
Readpoint_11
Client
String
Client interface via which the last transponder access or the last
command on this read point took place.
S7PNAPI: Access via PROFINET
OpcUaAPI: Access via OPC UA
UserDiagAPI: Access via WBM
Command
String
Command that was executed during the last transponder access
operation.
Depending on the client interface used:
PROFINET (Ident profile):
•
•
•
•
•
•
•
•
•
•
•
Programming via the OPC UA interface
INVENTORY
WRITE-ID
KILL-TAG
LOCK-TAG-BANK
PHYSICAL-READ
PHYSICAL-WRITE
FORMAT
TAG-STATUS
GET
PUT
NEXT
9.3 OPC UA events
PROFINET (FB 45):
WRITE
•
READ
•
INIT
•
MDS_STATUS
•
107