Table of Contents
Advertisement
7. To delete the file selected, press "Delete".
The Delete confirmation dialog appears. The file is deleted when you select "OK".
8. To restore the data from the selected file, select "Restore".
The following dialog appears:
9. The data is restored when you select "Yes".
The Transfer dialog appears. A progress bar shows the status of the restore process.
When the restore operation is completed, the Restore operation successfully completed.
message is displayed. The HMI device then restarts and remains in transfer mode.
10. If you do not want to allow data to be restored on the HMI device, select "No".
The "Service & Commissioning" dialog with the "Restore" tab appears.
11. Remove the storage medium, if necessary.
The data from the storage medium is now on the HMI device.
Note
After the restore process, check whether the touch screen needs to be calibrated as
described in "Calibrating the touch screen (Page 59)".
4.10.4
Update operating system
Requirement
● You have opened the "OS Update" tab in the "Service & Commissioning" dialog with the
"Service & Commissioning" icon.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Parameter assignment of a Mobile Client
4.10 Functions for service and commissioning
95
Advertisement
Table of Contents
