Table of Contents
Advertisement
Parameter assignment of a Mobile Client
4.5 Control Panel
4. Operate the required operator control or text box.
The screen keyboard opens as described in the section
"Display types for the screen keyboard (Page 52)" when you select a text box.
5. Press
To cancel the entry, press
6. Press
The Control Panel closes.
The Start Center is displayed.
4.5.4
Display types for the screen keyboard
The screen keyboard is used for entering alphanumeric, numeric and special characters. As
soon as you touch a text box, a numeric or alphanumeric screen keyboard is displayed,
depending on the type of the text box.
You can also open the screen keyboard by selecting the icon in the status bar. The icon is
shown in the figure in section "Overview (Page 50)".
How to set the screen keyboard is described in the section "Configuring the screen keyboard
(Page 56)".
Representation types for the screen keyboard
You can toggle the screen keyboard display as follows.
● Alphanumerical screen keyboard
The alphanumerical screen keyboard has the following levels.
– Normal level
– Shift level
The alphanumeric keyboard is always displayed after a restart.
52
to confirm your entries.
.
Note
The ' character on the keyboard is only displayed when followed by a space. If the '
character is followed by a letter, then the result will be an accent, such as "á".
The shift level has uppercase letters and other special characters.
. The dialog closes.
Operating Instructions, 07/2015, A5E36360099-AA
Mobile Client900RXA
Advertisement
Table of Contents
