Table of Contents
Advertisement
9. Selecting "Yes" restores the data.
The "Transfer" dialog appears. A progress bar shows the status of the restore process.
When the restore operation is complete, the "Restore operation successfully completed."
message is displayed. The HMI device then restarts and remains in transfer mode.
10. Remove the storage medium, if necessary.
The data from the storage medium is now restored on the HMI device.
Note
After restoring, a recalibration of the touch screen may be required, see also section
"Calibrating the touch screen (Page 59)".
4.10.3
Restoring from external storage medium – Restore
Use this function to restore data from a storage medium to the HMI device.
A restore operation deletes the old data from flash memory of the HMI device on
confirmation. The data backed up on the storage medium is then transferred.
Requirement
● You have opened the "Restore" tab in the "Service & Commissioning" dialog with the
"Service & Commissioning" icon.
● The storage medium with the backup data is in the HMI device.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
NOTICE
Data loss
All data on the HMI device is deleted during a restore operation. License keys are only
deleted after a security prompt.
Back up data before restore operations, if required.
Parameter assignment of a Mobile Client
4.10 Functions for service and commissioning
93
Advertisement
Table of Contents
