Table of Contents
Advertisement
Installing and connecting the device
3.1
Preparing for installation
3.1.1
Checking delivery
Check the package contents for visible signs of transport damage and for completeness.
Note
Do not install parts damaged during shipment. In the case of damaged parts, contact your
Siemens representative.
The documentation belongs to the HMI device and is required for subsequent
commissioning. Retain all enclosed documentation for the entire service life of the HMI
device. You must pass on the enclosed documentation to any subsequent owner or user of
the HMI device. Make sure that every supplement to the documentation that you receive is
stored together with the original documentation.
3.1.2
Device identification data
The device can be clearly identified with the help of this identification data in case of repairs
or theft. You can find the identification data on the rating plate.
Enter the identification data in the table below:
Identification date
Serial number
Order number of the device
Ethernet address 1
3.1.3
Mounting positions and type of fixation
The connection box is designed to be fitted in a control cabinet. It provides the connection to
the power supply and to the control system in the control cabinet. The connection box is self-
ventilated and is approved for all mounting positions.
The wall-mounting bracket and the magnetic wall bracket are designed for vertical mounting.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Source
Value
Rating plate
S KBY-..-........
Rating plate
1P 6AV...-.....-....
Rating plate
MAC.:
3
31
Advertisement
Table of Contents
