Parameter Assignment Of A Mobile Client; Desktop And Start Center - Siemens SIMATIC Mobile Client900RFN Operating Instructions Manual

Parameter assignment of a Mobile Client

4.1

Desktop and Start Center

Once the HMI device has been started, the display shows the Windows CE desktop.
①
②
③
④
⑤
The Start Center
The Start Center buttons have the following function:
● Transfer – Switches the HMI device to "Transfer" mode.
Transfer mode is only activated if at least one data channel has been configured in
accordance with section "Configuring transfer (Page 67)".
● Start – Starts the project on the HMI device.
If you do not perform an operation, a project already loaded on the HMI device will start
automatically in line with the settings in the Control Panel . If no project is loaded, the
Start Center will activate the transfer.
● Settings – Starts the Control Panel.
See "Functions in the Control Panel (Page 50)".
● Taskbar – Opens the taskbar and the Windows CE start menu.
The Start Center is displayed again if a project on the HMI device is closed or if it is
accessed from the project.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Desktop
Start Center
Start menu
Siemens HMI Input Panel
Icon for screen keyboard
4
45