Table of Contents
Advertisement
Procedure - ending remote control
The steps depend on the project. Refer to your plant documentation for additional
information.
In general - proceed as follows:
1. Touch a button configured for this action
2. Exit the screen containing the Sm@rtClient view
3. Touch an operator control operating position for a longer period of time.
This opens a menu.
4. Select the "Close" menu command.
See also
System manual WinCC V13.0 SP1 > Visualizing processes >Options > WinCC
Sm@rtServer (https://support.industry.siemens.com/cs/de/en/view/109091876)
7.5
Displaying infotext
Infotext provides additional information and operating instructions. Infotext can be configured
for a screen or operating object. The infotext of an I/O field may contain, for example,
information on the value to be entered.
An infotext that is available for an operating object is displayed with the <Help> key on the
screen keyboard. Depending on the configuration, infotext may also be accessed with an
operating object. Please refer to your system documentation for additional information.
Requirement
● Operating element with configured infotext is selected.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Operating the project
7.5 Displaying infotext
121
Advertisement
Table of Contents
