Table of Contents
Advertisement
4.5.3
Operating the Control Panel
You can operate the Control Panel using the touch screen. The following steps give a
general description of how to operate a function.
Requirement
● The current project has been closed.
● The Start Center is displayed.
Procedure
1. Press "Settings".
The Control Panel opens.
2. Double-click an icon.
The corresponding dialog is displayed.
3. Open a tab.
The content of the dialog changes.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Icon
Functional description
Changing password protection (Page 64)
Changing the printer properties (Page 72)
Enabling NTP (Page 80)
PROFINET enabled: not supported
Regional and language settings (Page 62)
Setting the screen saver (Page 66)
Saving to external storage medium – backup (Page 88)
Restoring from external storage medium – Restore (Page 93)
Update operating system (Page 95)
Disable automatic saving: not supported
Changing the network configuration (Page 97)
Displaying general system properties (Page 73)
Displaying memory distribution (Page 69)
Entering the Mobile Panel computer name (Page 83)
Configuring transfer (Page 67)
Setting the project storage location and start delay (Page 70)
Configuring e-mail (Page 86)
Configuring Telnet for remote control (Page 88)
Parameter assignment of a Mobile Client
4.5 Control Panel
51
Advertisement
Table of Contents
