Table of Contents
Advertisement
Safety guidelines
2.2 Notes about usage
2.2
Notes about usage
Intended use of the Mobile Client
The SIMATIC Mobile Client is intended for uses ranging from operator control and
monitoring, parameter assignment, and commissioning to troubleshooting for industrial
systems, in particular wind turbines.
The system consists of the following components:
● Device
● Connecting cable
● Connection box
Ambient conditions for intended use:
● Industrial environment according to EN 61131-2:2007
● Indoor use protected from weather
● Ambient temperature range 0 ... 45 °C
The connection box is designed as bushing for installation in a control cabinet wall. The
device connecting cable can be easily unplugged and plugged back for moving the device
from one operating location to another.
NOTICE
Wall bracket
Objects placed on the wall-mounting bracket may fall off and cause injury.
Do not use the wall-mounting bracket to hold other objects, for example tools.
Note
The device is not compatible with other system components, in particular not with those of
the SIMATIC Mobile Panel product family. You may only use the original system
components defined here.
Industrial applications
The HMI device is designed for industrial applications. It conforms to the following standards:
● Emission requirements, EN 61000-6-4:2007
● Immunity requirements, DIN EN 61000-6-2:2005
28
Operating Instructions, 07/2015, A5E36360099-AA
Mobile Client900RXA
Advertisement
Table of Contents
