Wall-Mounting Bracket With Cable Holder - Siemens SIMATIC Mobile Client900RFN Operating Instructions Manual

1.4.4

Wall-mounting bracket with cable holder

The wall bracket is used as a secure holder for the device during stationary operation and to
store the device when it is not in use.
①
②
③
Article number: 6AV6645-7CX04-1WP0
Risk of injury when device drops
The device can fall out of the wall bracket even when handled carefully.
• Never stand below the fitted wall bracket.
• The wall bracket is permitted for indoor use only.
• Do not mount the wall bracket on doors or covers.
• Do not fit the wall bracket anywhere where the device may fall out of the bracket.
Note
The wall bracket is designed for fixed used and is always to be screwed to the wall.
• The wall bracket should not be used to store tools or for other purposes.
• Ensure that the wall bracket is used correctly. If the wall bracket is not in use, it should be
stored in a suitable location.
• Make sure that no one can trip over the cable and cause the device to fall.
Mobile Client900RXA
Operating Instructions, 07/2015, A5E36360099-AA
Hooks
You attach the handle of the Mobile Client to the hooks.
Mounting holes
Holder for the connecting cable
CAUTION
Overview
1.4 Accessories
15