5. PARAMETERS
5. PARAMETERS
CAUTION
5.1 Parameter list
Never make a drastic adjustment or change to the parameter values as doing so
will make the operation unstable.
If fixed values are written in the digits of a parameter, do not change these values.
Do not change parameters for manufacturer setting.
Do not set values other than described values to each parameter.
POINT
When you connect the amplifier to a controller, servo parameter values of the
controller will be written to each parameter.
POINT
The parameter whose symbol is preceded by * is enabled with the following
conditions:
*: After setting the parameter, cycle the power or reset the controller.
**: After setting the parameter, cycle the power.
5 - 1