Mitsubishi Electric MR-J4-*B-RJ010 Series Instruction Manual page 28

1. FUNCTIONS AND CONFIGURATION
(c) MR-J4-500B-RJ010
The broken line area is the same as
MR-J4-200B-RJ010 or less.
(1)
(2)
(3)
(Note)
(4)
Side
(5)
(6)
(7)
(8)
Note. Lines for slots around the battery holder are omitted from the illustration.
POINT
The servo amplifier is shown with the front cover open. The front cover cannot
be removed.
No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Name/Application
Control circuit terminal block (TE2)
Used to connect the control circuit power supply.
Main circuit terminal block (TE1)
Connect the input power supply.
Battery holder
Install the the battery for absolute position data
backup.
Rating plate
Regenerative option/power factor improving reactor
terminal block (TE3)
Used to connect regenerative options and a power
factor improving DC reactor.
Servo motor power supply terminal block (TE4)
Connect the servo motor.
Charge lamp
When the main circuit is charged, this will light.
While this lamp is lit, do not reconnect the cables.
Protective earth (PE) terminal
Grounding terminal
1 - 17
Detailed explanation
MR-J4-_B_ section 3.1
MR-J4-_B_ section 3.3
MR-J4-_B_ section
12.2
Section 1.6
MR-J4-_B_ section 3.1
MR-J4-_B_ section 3.3
MR-J4-_B_ section 3.1
MR-J4-_B_ section 3.3