Firmware Update - Inspur NX5460M4 User Manual

Parameter description of Save & Exit interface:
Parameters
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as user Defaults
Restore user Defaults
Boot Override

3.3 Firmware Update

Users can update BIOS under DOS or under OS.
3.3.1 Update BIOS under DOS
System boots from USB DOS boot disk; enter the directory where afudos tool resides,
and confirm the bin file of the new BIOS version has been put into this folder.
When ME part has no change, just update BIOS part, execute the command: afudos
BIOS.bin /b /p /n /x /k /l
When ME part has changes, it needs to update BIOS and ME at the same time, execute
the command: afudos BIOS.bin /b /p /n /x /k /l /me
As shown in the following figure:
Function description
Save changes and exit
Discard changes and exit
Save changes and reset
Discard changes and reset
Save changes
Discard changes
Restore defaults
Save as user defaults
Restore user defaults
Boot override, you can select from the following boot options
BIOS Setup
４１